In Tires

How the System Works

A typical TPMS (Tire Pressure Monitoring System) monitors the air pressure in the tires with a wheel mounted sensor.  Tires are monitored individually by sensors attached to a special tire valve, or strapped to the inside of each wheel. Each sensor monitors and transmits tire pressure and temperature every few minutes. The temperature is monitored to compensate for cold and warm pressure variations. In order to reduce battery consumption, the sensors revert to a “sleep” mode when the vehicle is parked or not moving. During this “sleep mode,” sensors may only activate and transmit signals about every 45 minutes, if at all.
 
One of the best ways to keep the TPMS system operating properly is to follow the recommendations outlined in your vehicle’s owner’s manual.   
 
Always keep your tires inflated to the pressures indicated on the tire placard.  The placard is located on the door jamb or in the glove box.  This will allow the tires to perform efficiently.  The tires should be rotated as outlined in your owner’s manual or every 5,000 miles.
 
Proper tire inflation is essential for safe and efficient vehicle operation. Safety experts estimate that 25 percent of passenger vehicles are operated with tires that are under inflated. Vehicles with properly inflated tires experience optimum ride and handling characteristics, shorter braking distances, longer tire life, and improved fuel economy.

Is your vehicle equipped with TPMS?
If your vehicle is equipped with TPMS the low tire indicator light will illuminate when you turn the key to the on position prior to starting the vehicle

SAFER OPERATION

When the TPMS warning lamp on the instrument panel illuminates while driving, it means that the system has detected at least one tire with a pressure below the accepted minimum psi for the vehicle. The tires should be inspected and the tire pressure checked as soon as possible. In most cases, the lamp will extinguish after the tires are properly inflated and the vehicle has been driven at moderate speed and distance.

Why do I need my TPMS Reset?
There is a close working relationship between your tires and other mechanical systems in your vehicle, such as the wheels, brakes, shock absorbers, steering and suspension systems.

Any service procedure requiring the removal of the wheels may require that the TPMS system be reset, or recalibrated, depending on the type of system the vehicle uses.

WHEN TIRES ARE SERVICED
 
When reinstalling the sensor, it is suggested that the locknut, gasket and valve core be replaced and torqued to the proper specification.  It is also necessary to use the proper valve cap as it is also an integral part of the system.
 
It may be necessary to reprogram the TPMS when the tires are rotated, when a new sensor is installed, or after the vehicle loses power. This usually requires a reset tool and may involve the use of a special magnet and scan tool. Refer to the vehicle service manual to properly reprogram the TPMS.

If you need help find a shop to perform a reset on your TPMS or if you have a failure in your system and you need it serviced, we can help. Use our “Find My Shop” feature to located a trusted shop.


Service Tips

  • The correct pressure for
    your tires is the pressure listed on the Placard, NOT what is listed on the
    tire itself
  • Tire pressures should be checked (cold) on a regular basis.  A cold tire is one that has been driven for less than one (1) mile.
  • With modern tires, it is usually not possible to determine under inflation by visual inspection


Recent Posts
Comments
  • Butch Smith
    Reply

    Informative

Leave a Comment

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.