Uniform Inspection and Communication Standards

--Excerpts: Exhaust Systems--


WARNING: Federal EPA rules prohibit altering an exhaust system in any way that defeats the emission reduction components of a vehicle. Be sure to review and adhere to EPA policy on removing and replacing catalytic converters. Where state or local laws are stricter, they take precedence over these guidelines.

MANIFOLD/CAST & TUBE TYPE
Condition Code Procedure
Air injection tube in manifold broken A Require repair or replacement of injection tube or replacement of manifold.
Air injection tube in manifold corroded, affecting structural integrity 1 Suggest replacement of injection tube or manifold.
Air injection tube in manifold leaking A Require repair or replacement of injection tube or replacement of manifold.
Air injection tube in manifold loose A Require repair.
Air injection tube in manifold restricted A Require replacement of injection tube or manifold.
Air injection tube in manifold threads damaged A Require repair of injection tube or manifold.
Air injection tube in manifold threads stripped (threads missing) A Require replacement of injection tube or manifold.
Bolt broken A Require replacement of bolts.
Bolt loose A Require tightening or replacement of bolts.
Bolt missing C Require replacement of bolts.
Corroded, affecting sealability A Require repair or replacement.
Cylinder head threads stripped A Require repair or replacement of cylinder head.
Gasket leaking A Require tightening or replacement of gasket.
Heat stove bent B Require repair or replacement of stove. See note below.
NOTE: Stove may not be available separately; this may require replacement of manifold.
Heat stove broken A Require replacement of stove. See note below.
NOTE: Stove may not be available separately; this may require replacement of manifold.
Heat stove corroded, affecting structural integrity 1 Suggest replacement of stove. See note below.
NOTE: Stove may not be available separately; this may require suggesting replacement of manifold.
Heat stove missing C Require replacement of stove. See note below.
NOTE: Stove may not be available separately; this may require replacement of manifold.
Manifold broken A Require repair or replacement.
Manifold cracked B Require repair or replacement.
Manifold warped A Require repair or replacement.
Out of specification B Require repair or replacement.
Stud broken A Require replacement of stud.
Stud missing C Require replacement of stud.
Stud threads damaged A Require repair or replacement of stud.
Stud threads stripped (threads missing) A Require replacement of stud.

All contents © 2003 ,2008 Automotive Maintenance Repair Association, Inc., All Rights Reserved.


MAP web site maintained by

MAP web site maintained by Hunter Engineering Company
webmaster@hunter.com